Home > Specifications & Details > Out-Swing Hinged Doors

		Pella Commercial out-swing hinged patio doors: Available in sizes up to approximately 8’ wide x 10’ high Built to order in 1/4" increments Perform up to DP 70* Offer a broad range of hardware styles and finishes Feature a multipoint lock for added security** Offer optional matching sidelights and transoms Optional 1/2" low-profile sill available in three finishes: mill, bronze anodized and brass anodized. * Performance class and grade rating and related hallmark certification apply to single units only with appropriate glass options and not the combined or composite units. ** Multipoint lock secures door at 5 points on Architect Series doors over 8' tall and at 3 points on all other doors.

	Operable Units (frame dimensions*)	2' 0" (610)	8' 0" (2438)	4' 0" (1219)	9' 11-1/2" (3035)
	Nonoperable companion units (frame dimensions*)
	• Rectilinear (maximum of 50 square ft)	8" (203)	10' 0" (3048)	8" (203)	10' 0" (3048)
	• Curve Top**	1' 0" (305)	9' 0" (2743)	10 1/2" (267)	8' 0" (2438)
	*Opening = frame + 3/4" Sizes listed in parenthesis denote millimeters. Larger & smaller sizes available on custom basis. See your local Pella sales representative for more information. **Maximum area of 38 sq. ft. for all curve tops except for half circles and full arch heads, where the maximum area is 50 sq. ft. (when measured as a rectangle).

	Between-The-Glass Blinds
	Between-The-Glass Fabric Shades
	Woods
	Pine
	Mahogany
	Alder
	Douglas Fir
	Muntins/Grilles
	• Historical (permanent interior and exterior with spacers)
	• Removable Between-the-Glass (clad-matched exterior and wood interior)
	• Removable Interior (wood)
	• Grilles-Between-the-Glass (White interior, exterior finish matches aluminum-cladding color)
	Hardware
	• Bright Brass*, Satin Nickel*, Oil-Rubbed Bronze, Brown
	• Antique Brass, Chrome
	• Rocky Mountain Hardware (solid bronze)
	*Endura HardwareTM Collection offers superior corrosion resistance with a 10 year warranty. See written warranty for complete details.

	Clear Insulating Glass (IG)
	Low-E insulating glass with argon
	Dual Glazing with Between-the-Glass Options
	Triple Glazing with Between-the-Glass Options
	Laminated Glass
	Impact Resistant Glazing
	Tinted Glass
	Reflective Glass

	NFRC U-value Total Unit (39" x 79")			0.31 - 0.44	0.26 - 0.44
	Design Pressure* (psf)			40 - 70	40 - 70
	Structural Test Pressure (psf)			60 - 105	60 - 105
	Water Penetration			none @ 3.75 - 10.7 psf	none @ 6.1 - 10.7 psf
	Air Infiltration (@ 1.57 psf)			0.10 cfm	0.10 cfm
	* Performance class and grade rating and related hallmark certification apply to single units only with appropriate glass options and not the combined or composite units.

	Winter NFRC U-value			0.31 - 0.44	0.16 - 0.50
	Solar Heat Gain Coefficient			0.32 - 0.79	0.26 - 0.79
	Shading Coefficient			0.37 - 0.91	0.31 - 0.91
	% UV Transmission			7 - 62	5 - 63
	LBL Fading Damage*			0.18 - 0.64	0.15 - 0.65
	% Visible Light Transmission			40 - 83	33 - 83
	*Developed by Lawrence Berkeley Laboratories, the LBL damage function is a better predictor of fading damage than UV transmission. Lower values indicate less fading potential. (NOTE: This value does not consider visible light.)

	STC Rating			30 - 36	34 - 35
	OITC Rating			24 - 31	27 - 28
	*Performance based on standard glass options.

©2010 Pella Corporation.  All Rights Reserved. Privacy Policy.