Pella Commercial Solutions - Request an AppointmentPella Commercial Solutions - Request LiteraturePellaPella Commercial Solutions - WarrantyPella Commercial Solutions - ContactPella Commercial Solutions - Search
Pella Commercial Solutions - Home

Pella Commercial Solutions - OverviewPella Commercial Solutions - Specifications and DetailsPella Commercial Solutions - Project GalleryPella Commercial Solutions - Architect SupportPella Commercial Solutions - Contractor Support
 Pella Commercial Solutions - Specifications - Double & Single Hung WindowsPella Commercial Solutions - Specifications - Casement WindowsPella Commercial Solutions - Specifications - Awning WindowsPella Commercial Solutions - Specifications - Fixed Windows
 Pella Commercial Solutions - Specifications - Sliding DoorsPella Commercial Solutions - Specifications - In-Swing DoorsPella Commercial Solutions - Specifications - Out-Swing DoorsPella Commercial Solutions - Specifications - Out-Swing Entrance Doors 
 
Pella Commercial Solutions - Entrance Doors
Home > Specifications & Details > Out-Swing Hinged Entrance Doors > Steel or Fiberglass
 
Pella Commercial Solutions - Download Specifications
Pella Commercial Solutions - Sliding Doors  
Pella Commercial Solutions - Sliding Doors  
Pella Commercial Solutions - Download CAD Drawings
Pella Commercial Solutions - Locate a Rep
Pella Commercial Steel or Fiberglass out-swing hinged entrance doors:
Available in sizes up to approximately 6' 0" wide x 8' 0" high.
Pre-hung with stainless steel ball-bearing hinges (three hinges per panel for doors under 8' tall and four hinges per panel for 8' doors).
Available with a variety of panel styles and glass options.
Handicapped accessibility features including 1/2" low profile sill and 32" clear opening width.
1/2" low-profile sill is available in mill finish with thermal break.
Supplied without hardware to accommodate various hardware needs driven by local code requirements and architect specifications. Optional reinforcement at the top rail and stiles is available for use with closers and panic hardware.
Hardware Preparation options include: no bore, factory prepared for 2-1/8-inch latch bore, or factory prepared for 2-1/8-inch latch bore and 2-1/8-inch deadbolt (5-1/2 inches on center). Backset options include 2-3/8” or 2-3/4.
Pella Commercial Solutions - Sizes
Width        
    Single Door 3'0" (914)    
    Double Door 6'0" (1829)    
Height        
    6'8" (2032)    
    7'0" (2134)      
    8'0" (2438)    
 * Nominal door panel dimensions shown (frame sizes are larger).        
         
Pella Commercial Solutions - Configurations
Sidelight    
Left/Right    
Active/Inactive and Inactive/Active    
         
Pella Commercial Solutions - Panel Styles
Full-Lite    
3/4-Lite    
Half-Lite    
Twin Half-Lite    
6-Panel    
4-Panel      
3-Panel    
Flush    
Craftsman      
Rustic      
         
Pella Commercial Solutions - Frame Exterior
Aluminum-clad (broad range of colors available)    
         
Pella Commercial Solutions - Frame Interior
Unfinished (Pine — ready for site finishing)    
Primed    
Factory-prefinished    
         
Pella Commercial Solutions - Panel Exterior
Primed      
Unfinished (ready for site finishing)      
Factory-prefinished (6 stain colors)      
Factory-prefinished (10 paint colors)    
         
Pella Commercial Solutions - Panel Interior
Primed      
Unfinished (ready for site finishing)      
Factory-prefinished (6 stain colors)      
Factory-prefinished (10 paint colors)    
         
Pella Commercial Solutions - Glazing Options
Clear Insulating glass (IG)    
Low-E insulating glass with argon2    
Decorative glass    
         
Pella Commercial Solutions - Grilles
Applied grilles (composite material adhered to glass)3      
Grilles-between-the-glass (aluminum)    
Removable interior grilles (wood)    
Fixed grilles (composite material integral to glazing frame)    
         
Pella Commercial Solutions - Hardware Prep
No bore    
2-1/8" latch bore    
2-1/8" latch bore with deadbolt    
2-3/8" or 2-3/4" backsets    
         
Doors come prehung with commercial hinges and low-profile sill. Other exiting hardware such as closers, panic hardware and/or kick plates to be supplied by others to meet local code requirements.
1 Not available on all sizes.
2 High-altitude Low-E insulating glass does not contain argon gas.
3 Available Spring 2007 — check with your local Pella representative for availability.
©2008 Pella Corporation.  All Rights Reserved. Privacy Policy.